Furnace Maintenance Checklist

Furnace Maintenance Checklist

1. Heat Exchanger – Inspected for cracks & deterioration
Heat exchangers can develop cracks with age. If they exist, there is a risk of serious illness from the toxic fumes emitted.
2. Burners – Removed & cleaned if necessary
Dirty burners can cause poor combustion, soot, condensation, and will shorten the life of the furnace. You pay for useful heat that ?goes up the chimney? instead of going into your house.

3. Fan Switch – Checked & adjusted
A fan switch that is not properly adjusted can waste energy and cause nuisance fan cycling

4. Pilot & Pilot Assembly – Cleaned & adjusted as necessary
Weak or dirty pilots can easily be extinguished causing the furnace to shut down

5. Safety Controls – Operationally inspected
Safety controls that do not operate can cause dangerous problems.

6. Gas Line – Leak checked from the furnace shut off valve to the burners
Undetected gas leaks are dangerous.

7. Combustion Air – Openings will be checked
Blocked or restricted combustion air openings can be dangerous.

8. Flue Pipe – Inspected
Flue pipe corrosion or leaks are dangerous.

9. Temperatures & Performance – Recorded
An accurate record of vital data can indicate potential problems that can be eliminated.

10. Panels – Secure all panels
Loose panels can increase operating costs and cause either a shutdown or a dangerous condition.

11. Controls & Safeties – Inspected & tested

Controls and safeties that do not function properly can increase operation cost and cause other components to fail.

12. Lubrication – Application to motors & bearings

Improperly lubricated rotating equipment will eventually fail.

13. Belts & Pulleys – Inspected & adjusted

Loose belts and worn pulleys decrease air flow, increase operating costs and shorten the compressor’s life. Belts crack and break with age.

14. Air Filter – Replaced at customer’s option

A restricted air filter can cause your air conditioning unit to waste energy and shorten the compressor’s life.

15. Voltage & Amp – Draw of the blower motor, compressor & condenser fan motors checked & recorded

Source: www.aaserviceco.com
RELATED VIDEO
Canvas Preventative Maintenance Checklist Furnace Mount
Canvas Preventative Maintenance Checklist Furnace Mount ...
Fall Furnace Maintenance Checklist & Cost of Gas Furnace
Fall Furnace Maintenance Checklist & Cost of Gas Furnace ...
Maintenance Checklist for Annual Furnace Startup!
Maintenance Checklist for Annual Furnace Startup!
RELATED FACTS
Share this Post

Related posts

Rental Maintenance Checklist

Rental Maintenance Checklist

MAY 17, 2025

Residents come and go from every community. When move-outs occur, make a sweep of the unit, checking each room from floor…

Read More
Motorcycle Maintenance Checklist

Motorcycle Maintenance Checklist

MAY 17, 2025

If you’re looking to keep riding right until fall, this is a good time to give your bike some TLC. Jeff Holt, Editorial Director…

Read More